phyCORE-MPC5121e
|
 |
Hardware Features
- Freescale MPC5112e, 400MHz
- 16 MB Flash, bis 128 MB RAM
- 10/100 MBit Ethernet
OSELAS®.BSP() Features
- Automatisierte Inbetriebnahme
- U-Boot-2009.03
- Kernel 2.6.30-rc4
- Unterstützt Standard Kit (PCM-973)
- 10/100MBit Ethernet
- UART
- Open Firmware Support
DOWNLOAD
|
| | |
phyCORE-Z500PT
|
 |
Hardware Features
- Intel Atom Z500, 1,1GHz bis zu 1,8GHz
- bis zu 2GiB DDR2 SDRAM
- 100/1000 MBit Ethernet
- PATA SolidStateDisk
- SATA Schnittstelle
- PCI Express
- USB2.0
- Grafik
OSELAS®.BSP() Features
- Kernel 2.6.29.1-rt4
- Unterstützt Standard Kit (PCM-966)
- Ethernet
- UART
- USB 2.x Host Controller
- MMC/SD Karten Unterstützung
- Framebuffer
- QT4 Grafik-Bibliothek
DOWNLOAD
|
| | |
phyCORE-i.MX35
|
 |
Hardware Features
- Freescale i.MX35, 513 MHz (ARM v6)
- 32 MiB NOR Flash, bis 128 MiB RAM
- 256kiB SRAM
- bis 1GiB NAND Flash
- 10/100 MBit Ethernet
OSELAS®.BSP() Features
- Automatisierte Inbetriebnahme
- U-Boot-v2 (2.0.0-rc8)
- Kernel 2.6.30-rc4
- Unterstützt Standard Kit (PCM-970)
- NOR/NAND flash
- Ethernet
- UART
- I2C master
- onboard I2C EEPROM
- onboard I2C RTC
- USB 2.x Host Controller
- USB 2.x Device Controller (Gadget)
- One Wire Controller
- Framebuffer
- QT4 Grafik-Bibliothek
DOWNLOAD
|
| | |
phyCORE-i.MX31
|
 |
Hardware Features
- Freescale i.MX31, 513 MHz (ARM v6)
- 32 MiB NOR Flash, bis 128 MiB RAM
- 256kiB SRAM
- bis 1GiB NAND Flash
- 10/100 MBit Ethernet
OSELAS®.BSP() Features
- Automatisierte Inbetriebnahme
- U-Boot-v2 (2.0.0-rc8)
- Kernel 2.6.30-rc7
- Unterstützt Standard Kit (PCM-970)
- NOR/NAND flash
- Ethernet
- UART
- SPI master
- I2C master
- onboard I2C EEPROM
- onboard I2C RTC
- SRAM als Dateisystem
- USB 2.x Host Controller
- USB 2.x Device Controller (Gadget)
- Video Kamera Unterstützung (Farbe und S/W)
- One Wire Controller
- MMC/SD Karten Unterstützung
- Framebuffer
- Touch
- CAN bus
- QT4 Grafik-Bibliothek
DOWNLOAD
|
| | |
phyCORE-i.MX27
|
 |
Hardware Features
- Freescale i.MX27, 400 MHz (ARM v5)
- 32 MiB NOR Flash, bis 128 MiB RAM
- 256kiB SRAM
- bis 1GiB NAND Flash
- 10/100 MBit Ethernet
OSELAS®.BSP() Features
- Automatisierte Inbetriebnahme
- U-Boot-v2 (2.0.0-rc8)
- Kernel 2.6.29
- Unterstützt Standard Kit (PCM-970)
- NOR/NAND flash
- Ethernet
- Systemstart nur aus NAND
- SRAM als Dateisystem
- USB 2.x Host Controller
- One Wire Controller
- MMC/SD Karten Unterstützung
- Video Kamera Unterstützung (Farbe und S/W)
- UART
- SPI master
- I2C master
- onboard I2C EEPROM
- onboard I2C RTC
- Framebuffer
- Touch
- CAN
- CPU frequency scaling (133MHz...400MHz)
- Video Capturing
- ALSA Audio (Aufnahme und Wiedergabe)
- QT4 Grafik-Bibliothek
DOWNLOAD
|
| | |
phyCORE-PXA270CE
|
 |
Hardware Eigenschaften
- Intel XScale PXA270, 520 MHz (ARM)
- 64 MB Flash, bis 256 MB RAM
- 10/100 MBit Ethernet
- CAN Bus
- AC97 Audio Support
- Serial lines
- I2C- und SPI-Bus Support
- Display und Touch Support
- Various GPIOs
- PWM units
OSELAS®.BSP() Features
- Automatisierte Inbetriebnahme
- Unterstützt
- Standard Kit (PCM027/PCM990)
- RTG Kit (PCM027/PCM969)
- 10/100MBit Ethernet
- CAN (nur PCM990)
- UART
- Kamera, S/W und Farbe
- SPI master
- AC97 audio (play/record)
- I2C master
- onboard I2C EEPROM
- onboard I2C RTC
- SPI based GPIO expander
- Prozessors PWM, EventGPIO und Standard GPIO
- USB 1.1 (nur PCM990)
- SD und MMC card support (nur PCM990 )
- U-Boot-1.2.0
- Framebuffer und Touch (opt.)
- QT4 Grafik-Bibliothek
DOWNLOAD
|
phyCORE-MPC5200B-tiny
|
 |
Hardware Features
- Freescale MPC5200B, 400 MHz (PowerPC 603e)
- 16 MB Flash, bis 128 MB RAM
- 10/100 MBit Ethernet
- 2x CAN Bus
OSELAS®.BSP() Features
- Automatisierte Inbetriebnahme
- U-Boot-1.2.0
- Kernel 2.6.28.9
- Unterstützt Standard Kit (PCM-973)
- 10/100MBit Ethernet
- CAN
- UART
- I2C master
- onboard I2C EEPROM
- onboard I2C RTC
- up to 11 GPIO
- Open Firmware Support
- USB 1.1
- IDE/ATA (up to PIO mode 4)
- PCI bus support (3.3V)
DOWNLOAD
|
| | |
phyCORE-MPC5200B
|
 |
Hardware Features
- Freescale MPC5200B, 400 MHz (PowerPC 603e)
- 32 MB Flash, bis 128 MB RAM
- 10/100 MBit Ethernet
- 2x CAN Bus
OSELAS®.BSP() Features
- Automatisierte Inbetriebnahme
- U-Boot-1.3.3
- Kernel 2.6.28.9
- Unterstützt Standard Kit (PCM-973)
- 10/100MBit Ethernet
- CAN
- UART
- I2C master
- onboard I2C EEPROM
- onboard I2C RTC
- up to 11 GPIO
- Open Firmware Support
- USB 1.1
- IDE/ATA (up to PIO mode 4)
- PCI bus support (3.3V)
- FPGA firmware download
DOWNLOAD
|
| | |
The software that you have requested is covered under the terms of the GNU
General Public License (GPL). Please review the full text of the license
below.